#Watertight ethernet connector plus

Cable jacket OD that the plug is capable of accepting.

If the cable has solid or stranded conductorsįor the best RJ45 connector you will need to know:.

#Watertight ethernet connector plus

Conductor insulation diameter (the actual conductor wire plus insulation thickness) and likewise this measurement is often expressed in millimeters.This is often expressed in millimeters (mm). OD (outside diameter) of the Ethernet cable (the overall thickness).So what if you are dealing with brand “X” of one thing and brand “Y” of another?įor the Ethernet cable you will need to know: We also thoroughly document our connecting hardware so you can make an informed choice if you are not using trueCABLE brand Ethernet cable. So, a trueCABLE CatX unshielded RJ45 plug will fit and function on all of our unshielded CatX Ethernet (we will note exceptions as necessary). We go the extra mile of testing our components together. TrueCABLE is the exception here since we sell a system.

A properly documented and advertised plug would be listed as “Unshielded RJ45 Plug, 3 prong for solid copper Ethernet cable, fits up to 7.00mm OD and 0.94 to 1.04mm insulated conductors.” So, what did the “XYZ Manufacturer” do? They advertised their plug as “Cat6”, leaving out all the important stuff, and this leaves you guessing. This is not only a bit insulting, it is confusing. When a manufacturer (that only makes plugs and not the cable, for example) states a category on their plug it’s because they assume the consumer is not technically savvy enough to choose based upon technical data. Are you, the consumer, being lied to? Not precisely. There is little, if any, correlation between the two. They are likely not a manufacturer, but simply a reseller that will offer little to no support for their products.ĭo not shop by Category for the best RJ45 connector, as this can be misleading when mixing components from different vendors! “Category” stated on any bag of RJ45 plugs can be misleading when it comes to proper fitment, period. Avoid any manufacturer that does not publish all of the required details as you will be playing a guessing game from the start. Once you have decided on whether the RJ45 connector (also referred to as a plug) should be shielded or not, the next thing is… Research for the right cable & plugĪny reputable manufacturer will have detailed specifications and publish them. Shielded cables need shielded connectors for the cable shield to function properly (the outside of the metal connector functions as an extension of the cable shield and is used to bond to ground). When it comes to unshielded connectors on shielded cable, don’t do it. Another item of note is using shielded RJ45 connectors on unshielded Ethernet cable is bad form as it may mislead someone into thinking the cable is also shielded. Shielded connectors are typically “up size” in nature, and usually won’t make proper electrical connections with thinner unshielded Ethernet cable conductors. Using a shielded connector on an unshielded cable will yield no benefit, assuming the fitment is correct to begin with (and likely it won’t be). Conversely, if the cable is unshielded, then use unshielded RJ45 connectors. If the cable is shielded, you will want to use shielded RJ45 connectors.